❤️TIPS: All goods are authentic, with genuine patents, counterfeit must be investigated! Customers, please identify our products!
SHIPPING WORLDWIDE.
💯Payments Via PayPal® and CreditCard.
⭐Fast refund Guarantee>> Partial or full refund depend on the situation
🎉BUY MORE SAVE MORE🎉
🔥98.9% Of Customers Are Buying 2 Or More
Having a rust problem with your car chassis?
Rusty chassis changed beyond recognition.
Don’t worry! Our Chassis Rust Converter will help you solve the problem easily.
It is the easiest-to-apply, fastest drying rust converter. It takes existing rust and transforms it into an inert coating, sealing out moisture and preventing future rust and corrosion.
No more scraping, sandblasting or grinding!
This all-in-one surface conditioner and primer creates a dark, protective polymeric barrier that’s weather-proof and ready for a fresh coat of paint for your car chassis. This Chassis Rust Converter will provide more than twice the rust protection.
[Convert Existing Rust]
Ittransforms the existing rust into a dark and protective polymeric barrier, which is weather-proof and ready for a fresh coat of paint for your car chassis. And will provide more than twice the rust protection.
[Protect Iron and Metal Surfaces]
It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.
[Prevent Future Corrosion]
This rust treatment prevents future corrosion by locking out moisture from rain and snow. And dries in 20 minutes.
[Eco-Friendly]
It is non-flammable, low VOC, water-based treatment, non-toxic and eco-friendly.
[Surface Preparation]
Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.
[Easy to Use]
Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.
Do not apply this product if the surface temperatures are below 50°F.
Store it in a cool, dry place, protected from freezing or temperatures above 100°F.
For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.
Application equipment should be cleaned immediately with soap and water.
